BSVCY - M08-MOLD RELEASE MIX

  • MSDS: BSVCY
  • Manufacturer: MEGUIARS INC
  • Product Name: M08-MOLD RELEASE MIX
  • National Stock Number: 7930-00N042115
Product Identification

Product ID:M08-MOLD RELEASE MIX
MSDS Date:02/07/1990
FSC:7930
NIIN:00N042115
MSDS Number: BSVCY

Responsible Party
MEGUIARS INC
17991 MITCHELL S
IRVINE, CA 92714
US

Emergency Phone: 800-854-8073

Info Phone: 714-752-8000

Cage: GO009

Contractor
MEGUIARS INC/FORMERLY MIRROR BRIGHT POLISH
17177 IRVINE, CA 92714 US

Telephone: 714-752-8000

Cage: 14088

Ingredients

KEROSENE; (ALIPHATIC HYDROCARBON)

CAS: 8008-20-6

RTECS: OA5500000

Fraction By Weight: 13-27%

ACGIH TLV: 400 PPM (MFR)


MINERAL SPIRITS

CAS: 64742-88-7

Fraction By Weight: 19-39%

ACGIH TLV: 100 PPM (MFR)


BLENDED LIPIDS

Fraction By Weight: 15-32%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: PROLONGED OR
INTENTIONAL EXPOSURE TO HIGH CONCENTRATIONS MAY CAUSE IRRITATION TO
SKIN, DIGESTIVE OR BREATHING TRACTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SENSITIVE SKIN OR IRRITATION.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH CLEAR WATER
FOR AT LEAST 15 MIN. INGEST: DO NOT INDUCE VOMITING. INHAL: REMOVE
TO FRESH AIR. SUPPORT BREATHING GIVE O*2/ARTF RESP .

Fire Fighting

Flash Point:200F,93C
Extinguishing Media:DRY CHEMICAL, WATER, FOAM, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CONTAIN AND ABSORB. MAY BE CONTAINED IN METAL,
PLASTIC OR GLASS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM EXTREME HEAT.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE REQUIRED FOR NORMAL USE.
Ventilation:LOCAL EXHAUST: ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:NONE.
Work Hygienic Practices:NORMAL.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:200F,93C
Vapor Pres:NEGIGLIBLE
Spec Gravity:0.8 (H*2O=1)
Solubility in Water:NO
Appearance and Odor:GOLD TO LIGHT PASTE WITH SLIGHT ODOR OF HYDROCARBON

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:SANITARY LANDFILLS FOR ABSORBENT MATERIALS, OR
AS REQUIRED BY LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.